Yes! RetroLine works with rotary-dial phones (it understands pulse dialling) and push-button/touch-tone phones. It provides the line voltage, dial tone and ringing the phone expects. Choose your country in the dashboard and the tones, ring cadence and dial pulse order match what the phone was built for. It connects with a standard RJ-11 lead with the phone on line/pair 1 (older plugs just need a adaptor).
No. RetroLine doesn't connect to a phone line in the street from a power pole. Calls go through your cell/mobile phone plan over Bluetooth, so you can disconnect the landline service — or use a phone in a house that never had one.
Yes, but there is a limit to how many phones can be connected. Ensure it does not exceed 1 Ringer Equivalence Number (REN).
Those function entirely different and are in fact not real landline phones. They are a Bluetooth handsfree speaker in a replica landline shell. The call quality is also very poor on them and they usually have a lot of annoying problems.
RetroLine is a TNV-2 rated device. It is not designed to suppress or protect in over voltage scenarios. Do not ever connect RetroLine to any outside exposed wiring. We will not replace units damaged by over voltage.
This is known as a 600 series connector. Adaptors are available to convert it to RJ-11. Just make sure it's wired for line/pair 1.
No. Do not ever feed the RetroLine telephone RJ-11 line voltage. It is designed to put out voltage - not take it in.
Yes. RetroLine generates real ringing voltage, so a mechanical bells in your phone (if it has them) will ring when your cell/mobile phone rings.
Yes. An answering machine, or a phone with one built in, sees a normal line. RetroLine rings it when your cell/mobile phone rings, it picks up after its usual number of rings, plays your greeting to the caller and records the message, exactly as it did on a real landline. Keep in mind your mobile's own voicemail may answer first if it's set to fewer rings — set the machine to pick up sooner than your voicemail, or turn voicemail off.
RetroLine has one phone socket. It is designed for a single telephone. If a dual-splitter adaptor or extension phones on the same lead are connected, they do work but cannot exceed 1 Ringer Equivalence Number (REN) of load.
Having said that, if you own more than one RetroLine, you can put them into relay mode. This will allow you to have one master RetroLine which will relay to all others, thus allowing you to have more landlines around the house.
Any iPhone or Android phone with Bluetooth. Your mobile sees RetroLine as a hands-free device, like a car kit or a headset, so no app is required. One mobile is paired at a time; you can switch to another from the dashboard.
Yes, you can connect it to a computer and if you get a call for example on Teams, WhatsApp or Discord, the landline will ring and you can use it to talk. You will not however be able to dial-out to other phones if you do not have a VoIP service running on your computer.
A lot of time was spent perfecting the audio quality. Calls use the same Bluetooth hands-free audio as a car kit, including HD Voice (wideband) when your cell/mobile phone network supports it. The earpiece and microphone levels are adjustable, and a line echo canceller designed for old handsets keeps callers from hearing themselves.
Calls are placed though on your cell/mobile phone. Emergency numbers work the same way they do from the cell/mobile phone itself and RetroLine never delays an emergency number with its dialling rules in any country. As with any cell/mobile phone, make sure the cell/mobile phone itself has signal and battery. We recommend putting a USB power bank on the USB-C port of RetroLine to ensure that your landline always has power in an emergency black-out situation.
Yes. Dial your chosen sequence (# by default) and the assistant on your cell/mobile phone answers through the handset. You can ask it to call someone by name, set reminders or to even text someone. It's like having your own personal operator!
Only one device (IE: a smartphone) can be paired at a single time. You can swap to another from the dashboard whenever you like however and you can have a fallback list of devices.
Yes. Recordings are saved to the SD card as WAV files and can be downloaded from the dashboard, either started manually or automatically for every call. Laws on recording calls vary by country and state — it's your responsibility to tell the other party when a call is being recorded.
Any WAV or MP3. Tracks are converted in your browser as you upload them and stored on the SD card. You can mute the caller while they're on hold and hear the music quietly in your own earpiece so you know the call is still connected.
No, but we do offer them in the store. RetroLine and calls will work without a card (it's optional). We do recommend one however as it's needed for recordings, saving layout style, hold music, sound-board clips and logs.
Once RetroLine is connected to your network, everything can be configured via the web page it serves at http://retroline.local on any phone, tablet or computer. If you don't have RetroLine connected to your local WiFi, it will run its own access point for the initial setup procedure.
Yes. Should you not want to use the browser based dashboard, an app for iOS and Android is available.
Calls go over Bluetooth to your cell/mobile phone and never touch the Internet. WiFi is only used to reach the dashboard, to set the clock for Caller‑ID date stamps and for VoIP access.
Absolutely nowhere. Calls stay between your telephone and your cell/mobile phone, and recordings and settings stay on RetroLine's SD card in your home. There's no cloud service. We do not monitor or retain any of your RetroLine data.
From any USB-C supply, such as a phone charger. Unlike an old landline, it doesn't draw power from a phone line, so it needs a power source to run. A power supply that can deliver up to 1 Amp is required.
RetroLine is currently only available via Kickstarter.
They're being looked into to see if they are possible to do. The features page shows what's ready today and what's on the roadmap.
RetroLine is designed and built by Indigo Telephony.
Still have a question? Feel free to contact us via our Atlassian Service Desk.
Contact Us